Hydrogen for Health Q&A
Q. Oxidation is a base of all disease?
A. Hydrogen is the perfect ‘cure’ for oxidation. It’s fast, efficient, so small it can reach right into the DNA, only reduces the ‘bad’ free radicals and it’s ‘byproduct’ of reducing oxidation is water.
Q. Hydrogen on it’s own is a nutrient?
A. Our bodies are 62% hydrogen by volume. Thus hydrogen is our most important nutrient.
Q. How does the body become deficient in hydrogen?
A. Even though hydrogen is the most abundant element in the universe; on our planet hydrogen does not exist ‘free’ in nature, it’s bound to other substances to ‘keep it on the planet’ or it’d ‘rise to God’. Here’s a blog that answers that question.
Q. Why it’s so important to use distilled water in the Aquacure machine?
A. Putting impure water into the machine will (depending on the impurity) cause problems like excessive sludge buildup, plugging of orifices, coating of electrodes resulting in gas reduction, dissolving of electrodes resulting in stopping gas production, foaming resulting in loss of lye, and various kinds of poison gas produced like chlorine and carbon monoxide. Use pure water to avoid these issues.
Q. What is the difference between drinking the hydrogen rich water and breathing the hydrogen gas?
A. I’m assuming you mean the therapeutic difference. You need BOTH. Some ailments are best addressed with HRW and some with the BG, so you cover all bases by using both protocols. Note that inhaling BG for 12 seconds gives you as much hydrogen in your blood as drinking a liter of HRW. I drank HRW for years (since 2005) before starting inhaling in 2016. The HRW was good, but my body was still getting ‘old’; my REAL rejuvenation started after inhalation.
Q. We have an AquaCure and would like a refresher on the breathing. When does a body reach saturation while breathing and how long does it stay in the body and do its good stuff? Is more breathing better, or is there a maximum?
A. At the recommended 2% inhalation rate, most bodies reach blood saturation in about 20 minutes (about 15 minutes at 4%). Once saturation is reached you exhale any excess. So MORE is extraneous.
A. Longer is better, so you keep your blood hydrogen up, as the hydrogen then gradually saturates into your tissues. Different tissues take different amounts of time to become saturated.
A. There is no limit to the length of time you can inhale. But it seems to be most effective if there is an occasional break to allow the body time to assimilate. A. Once inhalation stops it takes about 15 minutes for the hydrogen in the blood to leave.
Q. Stories of how hydrogen has eased COVID-19 symptoms helping those affected to breathe easier.
A. Brown’s Gas as a treatment for COVID-19 is part of an 80 page document that I posted here:
Q. I bought the Aquacure, and have since seen a few other people who bought one as well. They have videos online sharing the differences between the Aquacure and others. One guy talks about how toxins are in the water with the Aquacure and how it is not a good idea. Another guy uses the machine and promotes it and has added another two containers of water the gas goes through. This has had me very concerned.
A. The “They” that I’m aware of is one enthusiastic young man that has a Vested Interest in trashing ALL other technologies other than his. He doesn’t just pick on the AquaCure. I won’t go negative and tell you all we’ve discovered about this man, but he is under investigation.
A. If anyone wants direct rebuttals and corrections to what he says, just contact me via my website with questions and I will address them: https://eagle-research.life/contact/
A. As for ’toxins’ in the water, the AquaCure uses a catalytic electrolysis method discovered in the 1700’s; and used for over 2 centuries without ‘poisoning’ anyone. The catalyst is supposed to STAY in the electrolyzer and it does, mostly.
A. For the tiny amount that rides out on water moisture, we put the BG through two bubblers to scrub the gas, so there is zero chance of the BG you inhale being contaminated. The BG is pure and extremely therapeutic.
A. You are right to be concerned because we aren’t playing with toys here. It is appropriate to learn the truth about these technologies so you can make the best choices for yourself and operate them properly.
Q. Can using a $200 Hydrogen water machine have any effect, at least as a stop gap until we can buy one of yours? A. ANY hydrogen is better than none. BG is better than hydrogen alone because it contains the ExW.
Q. Last year you mentioned a new protocol using the AC50 to create New Water. Are you still planning to release that and if so, when can we expect it?
A. Yes I’m still planning to release it. But not until I can support it with apparatus and information. Getting to it has become more of a challenge than I anticipated because I’m working 12 to 16 hour days just building and supporting AquaCures… And that’s with 14 people helping me.
Q. Dr Cowen states deuterium is not good. Deuterium is an isotope of the hydrogen atom that occurs naturally in water. Does the AquaCure have any concern with this?
A. SOME Deuterium is natural and needed in the body but too much shuts you down just like it does a nuclear reactor. The AquaCure has nothing directly to do with Deuterium in water. Whatever Deuterium is in the bubbled water is still there after BG bubbling. BG doesn’t add or subtract Deuterium.
A. However, BG can be used to MAKE Deuterium depleted water, using the apparatus that creates New Water as mentioned above. One of the advantages of New Water is that it is DDW.
Q. I have been using the AquaCure for a month. I have plenty of scars and have not seen anything change. Am I missing something or doing something wrong. Sleeping with hydrogen at 100%
A. A month is too short of time to see a change to scars. Your body decides where to use the BG you inhale and drink and after beginning organ repair, it turns back on your immune systems and finally addresses your regeneration systems (including your own stem cells), at which time your scars will start to fade… Mine were noticeably faded after about 8 months of inhalation.
A. You can get your scars to fade faster if you put a dressing on them and soak the dressing several times a day with BG bubbled water. It will still take weeks or months to see a significant change.
A. inhaling 100% of the AquaCure gas production is NOT SAFE; particularly when inhaling for longer than 10 minutes. You are guaranteed to have greater than 4% hydrogen in your intake breath, which is non-toxic but potentially explosive. If inhaling all night, you’ll get just as much therapeutic benefit from a mixture containing 1% hydrogen in your intake breath; that mixture will maintain full blood hydrogen saturation.
Q. Can drinking bubbled distilled water affect the body’s pH as tested via urine?
A. Urine and saliva do not accurately reflect the body’s blood pH. They are waste and excretions that contain products that affect their pH independently of the blood pH. A. The pH of the blood is tightly controlled and will not change much no matter what you ingest, until the body’s internal buffers are used up, then you’ll get very sick and (if not mitigated fast) die. It’s wise to maintain your body’s buffers.
A. 98% of my fluid intake since 2005 has been BG bubbled distilled water. I’m much healthier now than I was then.
Q. Lets say I breathe the brown’s gas, then stop for moment but will do later, does it help to release the pressure (loosen knob) and turn off machine or just keep knob tight and keep on. Does it matter in terms of longevity of the Aquacure?
A. There is no need to ‘loosen’ any ‘knob’. Just shut off the machine and re-start it at will. A. The AquaCure is designed for a minimum of a 20 year lifespan. You can turn it on and off as much as you like and it is more efficient to turn it off when not in use.
Q. Can I hook it up to my cpap machine to breathe it at night?
A. FAQ: Can I use the AquaCure with a Mask, CPAP or BiPAP machine?
Up until now I’ve recommended against it. I never want people to have a potentially explosive mixture in their lungs… And a mask tends to retain some of the exhaled hydrogen.
To explain further… When people are inhaling, most of the hydrogen inhaled goes into the blood, at first, but as the blood gets saturated, the ‘excess’ hydrogen starts getting exhaled.
When you combine the hydrogen coming from the AquaCure with the exhaled hydrogen in the mask, you MIGHT get a hydrogen content greater than 4% in the mask.
I normally ONLY recommend cannulas, so there is no mask to concentrate the hydrogen.
But upon review
I’m willing to agree to say it’s OK, but ONLY at a 1% mixture (cut my recommended % in half).
So if you are looking at the 2% chart in the AquaCure Manual, just divide it in half for the PWM setting (machine % gas production).
In my case, my 2% setting (2% hydrogen in my intake breath) is 36% setting on the AquaCure, so my 1% hydrogen inhalation would be 18% setting on the AquaCure.
This lower hydrogen rate (1%) is NO PROBLEM because once the blood is saturated the ‘extra’ hydrogen (from the 2% setting) would have been wasted anyway.
It’s MUCH more effective (therapeutically) to inhale for longer than to inhale ‘more’ because your body exhales any excess.
So Yes, go for it. I believe it’ll be fine.
For a simple mask (instead of cannulas) you’d just make a ¼” hole in a convenient place and stick the AquaCure hose into it.
For a CPAP, you’d use an adaptor like this to feed the hydrogen from the AquaCure into your CPAP hose.
But for a BiPAP, because of the ‘reverse’ pressure differences the only way I see is to set the hydrogen hose through a hole in the air intake air filter. You can do this with a CPAP too.
The reason for this in because the BiPAP pressure increases for the inhaled breath, which would ‘hold back’ gas flow from the AquaCure (if the gas was put on the ‘pressurized’ side of the pump) so no hydrogen would be in the inhaled breath…
And then the BiPAP pressure decreases for the exhaled breath, which would release all the ‘stored’ hydrogen (pressure rising during the intake breath) but now it’d be going out with the exhaled breath and wouldn’t go into the body.
Putting the hydrogen in with the intake air on the suction side (air filter side) of the BiPAP pump solves that issue, so all inhaled air would have hydrogen in it.
Q. I’m getting near the 200 hr point. Can I use a plastic tub to empty the lye water into? Or should it be glass?
A. Plastic tub or bucket is fine. Stainless Steel pot is fine. Glass is fine but it’s harder to find one large enough. To let the sludge settle, I prefer pouring the mixture into a liter (quart) sized jar.