The Relax FIR Sauna – How It Is Made and How It Works
of the RELAX SAUNA
There are 3 components of the FIR heater: FIR materials, Heat Materials & Control Component
The electric current sends Far infrared Ray energy light out from the semi-conductor chips.
The purpose of the Fans are to keep the 40 Patented Semi-conductor chips cool.
Because of this, the emitting of the healing FIR energy rays are continuous.
This is why the relax sauna generally works in about 1/2 the time of other FIR Saunas.
automatically turn off to prevent any damage. Their energy goes on and off. You generally cannot tell,
because Far Infrared Light cannot be seen by the human eye. So you can’t see it going on and off.
(Same principle as to what happens when your computer fan goes out.)
|Because of the reflecting nature of the material that the Sauna is made out of, the
Far Infrared Rays are able to circulate throughout the Sauna, allowing every part
of the body to absorb the Far Infrared Rays.
The Patented Automatic Heat Controlled Ceramic Semiconductor combines heat materials,
FIR Materials, and a control component.
Pictures of the FIR heating unit (with fan)
after absorbing energy is then added.
It was then confirmed by top scientists in Taiwan that the wavelength is
between 4 um and 14 um which is suitable (and reputed to be very beneficial) for our bodies.
This device allows the ceramic semiconductor chip to lower the electric current when the heat is too high,
and to increase the electric current when the heat is too low. Thus the heat is kept at a steady temperature at all times.
The mirror-like surface of the Sauna tent reflects the far infrared LIGHT back
over and over and over again – thus creating an EVEN distribution of the Far infrared Light
in the tent, whereby You are absorbing the light from every nook and cranny of the tent.
In other saunas, you only absorb the light from the source of far infrared light, and thus
only about 1/2 to 2/3 of you gets the benefit of the far infrared light.
The Sauna whirl is symbolic of the EVEN DISTRIBUTION of Far Infrared Light.
A fourth level of FIR Technology (the ceramic (computer programmed) semi conductor chip)
filters out all of the non-healing energies, so you do not have to contend with anything
but the absorbable far infrared light of 4 – 14 microns.
October 7, 2022 @ 12:09 pm One Radio Network / The Benefits of Using a FIR Sauna | One Radio Network
[…] How It’s Constructed and How It Works […]